Straightforward pricing

Honest numbers, no surprises

A flat $89 service call covers the diagnosis and applies toward your repair. Everything below is an indicative starting point — you approve a firm quote before we touch a screw.

Indicative starting prices

By service

Diagnostic / service callApplied toward the repair if you proceed
$89
from $149
from $139
from $129
from $119
from $149
from $139
from $129
from $129
Every figure is a starting estimate for typical labor, not a quote. Final pricing is set after an on-site inspection because premium appliances differ dramatically by model, generation, fuel type and parts availability. Part costs are itemized separately. We never charge for work you have not approved.
What the $89 buys you

A factory-trained technician comes to your kitchen, tests the actual failure — ignition, element resistance, gas pressure, sensor readings, sealed-system behavior — and tells you exactly what is wrong and what it costs to fix. It is a real diagnosis, not a sales call, and it comes off the top of your repair.

Good to know

Pricing questions, answered

Direct answer

How much does appliance repair cost in Denver?

Most repairs begin with a flat $89 service call for the on-site diagnosis, which applies toward the repair if you proceed. Total cost depends on the appliance and parts; you always get a firm quote before work starts. Call (720) 790-9436 for specifics.

Direct answer

Is the $89 fee on top of the repair?

No — the $89 diagnostic is credited toward the repair when you go ahead. You are effectively paying it once. If you decide not to repair, the $89 simply covers the expert on-site diagnosis.

Direct answer

Why can’t you quote an exact price over the phone?

Premium appliances vary enormously by model, generation and fault, and the same symptom can have several causes. We give an honest starting range on the phone and a firm, itemized quote once a technician has diagnosed the unit in person.

Pricing FAQ

Do you charge for the quote?
The $89 service call covers the diagnosis and the quote. There is no separate quoting fee, and no work happens until you approve the price.
Are parts included in these prices?
Starting prices reflect typical labor; part cost varies by model and is itemized in your quote. We use factory-grade parts, not universal substitutes.
Do you offer any guarantee?
We stand behind our workmanship and the parts we install. Ask your technician about the specific coverage for your repair when you approve the quote.
Can the altitude recalibration be done on its own?
Yes. If your Wolf gas range burns yellow or your oven runs cool, we can perform a high-altitude recalibration as a standalone visit — still just the $89 service call plus the calibration labor.

A firm quote,
before any work.

Book a diagnostic today. Calls answered 24/7 across Denver Metro.

Customer reviews

Trusted in Denver kitchens

Recent customer experiences with our appliance repair service.

4.9
847 customer reviews
Called Monday about our Wolf range — burners were running hot after we moved in. Technician arrived Tuesday with parts already on the truck. Turns out the altitude orifices had been installed wrong by the previous owner. Calibrated on the spot, everything has been precise since. Very professional, explained every step.
Jennifer M.Washington Park
Our Wolf oven was reading 50 degrees low — we'd been overcompensating for months. The tech tested it, replaced the temp sensor, and re-ran calibration. Baking has been completely different since. Honest diagnostic, fair price, no upselling.
David Chen
Three igniter clicks on the left burner, then nothing. A different company quoted replacing the entire control board — nearly $900. Denver Wolf Repair diagnosed a faulty igniter module and fixed it for a fraction of that. Trust the specialists.
Sarah T.Cherry Creek
Wolf dual-fuel range with erratic simmer on the gas side. Technician found the altitude conversion had never been completed by the original installer — corrected it in under an hour. At 5,280 feet this is apparently common. Highly recommend for anyone with a similar setup.
Robert K.
Sub-Zero stopped cooling — called at 7 am, someone was here by 11. Condenser fan, which they had in the van. Groceries were saved. These technicians clearly know this equipment cold.
Lisa P.Stapleton
Wolf range hood stopped capturing smoke. Tech found a failing blower motor, ordered the part and installed it within two days. No upsell attempts, no unnecessary extras. Clean and done right.
Mark H.Highlands
Scheduling was easy, tech was on time. Oven door seal was cracked and they replaced it cleanly. Would have given 5 stars but had to wait a few extra days for the part. Otherwise thorough diagnostics and honest about what actually needed fixing.
Amanda W.LoDo
Control board on our Wolf oven started throwing error codes. I dreaded a huge bill, but the tech walked me through exactly what was wrong before touching anything. Repair was done same visit. Professional from first call to sign-off.
Tom B.Littleton